Jk-audio innkeeper LTD Manuel d'utilisateur télécharger pdf (Page 7)

Connecting Cables

Although each application will require a slightly different setup, there

are some cables that everyone can agree upon:

1. Phone Line - Connect the supplied RJ-11 phone line cable

between the jack marked “Line” and your wall jack. Be sure this

jack can support standard single-line analog telephone

operation.

2. Send Audio - Connect a line level audio signal from the output of

your other equipment such as a mixing console or PA system, to

the XLR Send jack on the innkeeper LTD.

3. Caller Audio - Connect the Caller output jack to a line level input

on your mixing console or other equipment.

4. Power - Connect the supplied AC power cord to the back of the

innkeeper LTD and then to an AC power outlet.

This device should be connected to an adequate surge

protective device at all times both for the power connector

and for the telephone line to avoid damage from lightning

or electrical surges.

Your innkeeper LTD is now ready to take calls. You may want to

connect an auxiliary phone to the innkeeper for call setup, or you

can simply use Auto-Answer or the Call button to answer an

incoming call.

Connection

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Pas de commentaire

Jk-audio innkeeper LTD Manuel d'utilisateur Page 7